If you have a crawl space and attic you need a top to bottom conduit and
maybe a few conduit runs behind locations where you have or might have
any AV equipment but putting 3 of these in every room isn't going to be
a good investment. Smurf rube would work just as well for most people.
I've been working on home automation for over 15 years and I'm close to achieving my goal which is a house that understands where everyone is at all times, can predict where you are going next and can control lighting, heating and other systems without you having to do or say anything. That's a true "smart home".
Digital Twin are an online representation of a real world object, a copy of its properties in the digital world and a way to send updated and commands to it. In effect I've been making them for years but now they have a trendy name.
An overview of the many sensors I've experimented with for home automation including my favorite under-floor strain gauge, through all the usual PIR, beam and contact sensors to some more esoteric devices like an 8x8 thermal camera.
Why automated learning is hard for a smart home. The perils of over-fitting, under-fitting and how the general unpredictable nature of life makes it hard to build a system that learns your behavior.
One way to reduce the volume of sensor data is to remove redundant points. In a system with timestamped data recorded on an irregular interval we can achieve this by removing co-linear points.
Home automation systems need to respond to events in the real world. Sometimes it's an analog value, sometimes it's binary, rarely is it clean and not susceptible to problems. Let's discuss some of the ways to convert these inputs into actions.
Another super useful function for handling sensor data and converting to probabilities is the logistic function 1/(1+e^-x). Using this you can easily map values onto a 0.0-1.0 probability range.
In a home automation system we often want to convert a measurement into a probability. The ATAN curve is one of my favorite curves for this as it's easy to map overything onto a 0.0-1.0 range.
Several years ago we did a major remodel. I did all of the finish electrical myself and supervised all of the rough-in electrical. I also put in all of the electrical system and water in our barn. I have opinions ...
An if-this-then-that style rules machine is insufficient for lighting control. This state machine accomplishes 90% of the correct behavior for a light that is controlled automatically and manually in a home automation system.
